The Drape Forming Method for Prosthetic Sockets

How to drape form with Orfitrans Excel

The drape forming method is a tried and tested method for the fabrication of (inner) prosthetic sockets and orthoses. In contrast to the bubble/blister forming method, drape forming involves using a flat, heated thermoplastic sheet and manually forming it around a mould.

Thanks to its self-adhesive properties, Orfitrans Excel lends itself perfectly to this method. It is a light-weight material that pulls easily and uniformly for comfortable sockets and orthoses.

Read on to discover our best drape forming tips and tricks and learn how to get optimal fabrication results from Orfitrans Excel.

For this article, we’ll be focusing on the fabrication of a transtibial prosthetic socket.


When to use drape forming

Both drape and bubble forming work perfectly to create qualitative, durable O&P products. The choice between the two methods is entirely dependent on the personal preference of the prosthetist.

The drape forming method has a couple of specific benefits:

  • Vacuum equipment is not required. (If preferred, however, drape forming can be combined with a vacuum).
  • Drape forming makes it easier to maintain an even thickness across the entire socket or orthosis.

You could consider using drape forming in the following instances:

  • When you are working with smaller moulds.
  • When an even thickness is essential.
  • When using thinner thermoplastic sheets.
  • For orthotic applications.


Drape forming a transtibial prosthetic socket

Thermoplastic Materials

Orfitrans Excel is the material of choice for the drape forming method, because of its self-adhesive properties. These thermoplastic sheets are available in a wide range of thicknesses, but we do recommend choosing a thickness of 3, 4 or 5 mm.

For this article, we are using a 4 mm thick Orfitrans Excel sheet.


Step 1: Prepare the positive mould

  • Position and install a plaster, foam or wooden positive mould.
  • If using, connect a vacuum system. We’ll be showing the drape forming method without a vacuum.
  • Treat the mould with a very light layer of silicone spray and rub it in.

Spraying the plaster positive mould with silicone demoulding spray.

If you prefer, you can apply a cotton stockinette to facilitate socket removal. Do keep in mind that the pattern of the fabric can transfer onto the thermoplastic material.

Read our article about creating the perfect positive mould for more tips and tricks.


Step 2: Heat the thermoplastic sheet

Orfitrans Excel 4 mm should be heated at a temperature of 130°C (266°F) for 6 minutes (convection) or 3.5 minutes (infrared). Have a look at the Orfitrans Activation Poster for an overview of activation temperatures/times for all Orfitrans materials.

  • Heat the Orfitrans Excel sheet in a convection or infrared oven.
  • Place the material flat on a Teflon sheet.


Step 3: Form the sheet on the positive mould

  • Position the positive mould at a horizontal angle.
  • Take the Orfitrans Excel sheet out of the oven and drape the material over the positive mould.
  • Create a seam along the underside of the mould by pressing the material together.
  • While the material is still hot, use scissors to cut away excess material and to create a seam.
  • Wearing heat-resistant gloves, form and press the material around the mould. Make sure it conforms well and try to avoid air bubbles.

Step 4: Smooth out the seam

  • Use pliers to secure the bond of the seam.
  • Carefully trim any excess material with a cutter.
  • Grind and polish the seam to make it flat and smooth.
  • To make the seam extra flat, you can lightly reheat the area with a heat gun.
  • Using a narrow round object, such as a screwdriver, roll along the seam to flatten and smooth it out. Take your time for this step; the seam should become almost undetectable.

Step 5: Finish the socket

Remove the socket from the mould to trim and polish the edges. Read more about this final step.


Written by Marc Blij

Marc studied in Brussels and London and is a Certified Orthotist and Prosthetist.

After working in an O&P lab at the Universities of Louvain and Brussels, he decided to set up his own O&P lab in Antwerp. For over 30 years, he ran his own practice, together with his wife.

Since 2006, Marc works at the Orfit Industries headquarters in Wijnegem (Belgium) as a Product and Educational Specialist in Orthotics & Prosthetics and Physical Rehabilitation.

If you’d like to receive the latest product updates and interesting Orfit news, subscribe to our newsletter:

Subscribe to our mailing list

* indicates required
Select your preferred newsletters

The protection of your personal data is our priority. Thank you for subscribing to one of our newsletters. We would like to invite you to share some personal data with us. The protection of this data is our priority.

By submitting this form, I agree to the processing of my data to receive personal messages by mail.

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at We will treat your information with respect. For more information about our privacy practices please visit our website. By clicking below, you agree that we may process your information in accordance with these terms.

We use MailChimp as our marketing automation platform. By clicking below to submit this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.

We've selected some similar articles for you
High-Temperature Orthoses: A Practical Guide
Drape forming long-term orthoses with Orfitrans Excel
High-temperature orthoses offer long-term support for patients with chronic or permanent conditions. Read our drape forming tips for long-lasting orthoses that offer reliable stability and optimal comfort.
Read more
Advantages of Using a Thermoplastic Check Socket
Using a test socket to obtain the perfect fit
A check socket is an essential aid in the creation of a qualitative definitive socket that will last the patient many years. Taking the extra time to fit the patient with a check socket before fabricating their actual definitive socket truly pays off in the long term and offers both the patient and the prosthetist many advantages.
Read more
How to Finish an Orfitrans Thermoplastic Socket?
A perfectly finished socket for optimal patient comfort
Once you have pulled a thermoplastic socket and let it cool down it is time to remove the socket from the positive mould and finish it in a few additional steps. Follow along as we take you through the steps to obtain a perfectly finished socket.
Read more